Feed on
Posts
Comments

Category Archive for 'Technical'

Save Your Printer This Summer

Most of the problems arise in Epson printers. They have a tank style cartridge and the printhead is in the printer. Canon, new HP’s and Lexmark’s and Brother printers have printhead printers as well.

Read Full Post »

Failure to calibrate after cartridge installation, can result in light print or over saturated dark print caused by colours not properly matched. Dumping can be caused by over saturation or over development of toner.

Read Full Post »

HP’s CE285A used in monochrome Laserjet Pro M1212 MFP and Laserjet Pro P1192W, are still in short supply, reports Actionable Intelligence.

Read Full Post »

Recently, we have seen some very colourful and worn drums from the colour cartridges of HP 1215, 1515, CP2025 and other models that take the CB540 series or CC530 series of cartridges. This occurs from regularly printing black only documents.

Read Full Post »

Here at Cartridge World, we try and stay on top of changing trends in the Printing world. Recently upon reviewing the newest Brother HL-2240 series, we were shocked to find out the following information.

Read Full Post »

By accepting firmware upgrades for your printer, you could potentially lock out the use of refilled printer cartridges. This means you may only be able to use original cartridges supplied by your printer manufacturer, which will in turn increase the amount you spend on printer cartridges.

Read Full Post »

Samsung Printer Waste Bin Woes

We looked up possible problems with this unit; what a red light meant and there were many possible problems related to this. Our technician started to do some troubleshooting. He removed all the cartridges. Once the cartridges are removed you can see the waste bin on the left hand side. The waste bin works with a sensor to advise when the waste bin is full.

Read Full Post »

« Newer Posts